Prečo nemôže parná železo vyrábať paru?

Steam iron, a must-have artifact in modern families, is loved by many users for its efficient ironing effect. However, occasionally the steam iron fails to produce steam during use, which undoubtedly affects the user experience. So, what exactly causes the steam iron to fail to produce steam?

1. Lack of water in the water tank

Steam irons rely on water in the water tank to produce steam. If there is insufficient water or no water in the water tank, steam cannot be generated. Therefore, when encountering this problem, the first task is to check the water level in the water tank.

2. Water tank blockage

Minerals in water in hard water areas may form scale during heating, which may block the inside of the water tank or the connecting pipes, hindering the generation of steam.

3. Failure of the heating element

The heating element of the steam iron is a key component for heating water into steam. If the heating element has problems such as circuit disconnection or aging, it will not provide enough heat to evaporate the water.

4. Failure of the thermostat

The thermostat is responsible for regulating and controlling the temperature of the iron. If the thermostat fails, the temperature may be too low to effectively heat the water into steam.

5. The steam hole is blocked

After long-term use, the steam hole on the iron base may be blocked by scale or other impurities, affecting the smooth spraying of steam.

6. Power supply problem

Poor power connection or damaged power cord may also cause the iron to not work properly and thus fail to produce steam.